Typical factors you may want a heating system repair.

Unusual reasons you might need heating repair service Allen TX

Among the many most extreme sentiments in the world is having to contact a HVAC professional within the dead of the cold weather since your heating is not turning on. There are a number of reasons why your heater may not work, and there are some things you should check before you call a heater repair technician.

Filtration system

You could have a filter that is full of dirt if your furnace turns on but does not seem to be blowing air. You might want to replace your filter once almost every season. If you check your filter and find that it is dirty, change it right away.

Ignition sensor

An issue with your ignition sensor is a second factor your furnace might not work. These products are consistently in contact with flames and could get burned up on the ends. Your furnace may not turn on or may not stay on if that happens. You possibly can remove the sensor and use a wire pad or bit of sandpaper to take out the soot.

If that doesn’t fix the problem, however, the sensor is probably bad and will need to be replaced by a professional.

Circuit breaker

The circuit breaker could be tripped if your thermostat appears to be working OK but your furnace is not turning on at all. This is an easy fix, as all you have to do is check the circuit for your furnace in your circuit box and reset it if necessary.

Pilot light

If you have a gas furnace, there is a pilot light that ignites your gas burner to provide the heat for the unit. This light could go out, and if it does, your central heat won’t blow heated air. If necessary, you can easily check the pilot light and relight it. You should call in a heater repair technician if you smell a strong odor of natural gas.

Thermostat

Perhaps the most common reason for a furnace not to get the job done is a problem with the thermostat. If your heater isn’t turning on, check to make sure your thermostat is set to “heat” rather than “cool.” If you have a programmable thermostat, check to make sure that there isn’t a time and date setting programmed in that is preventing the heater from coming on. The good news is that if the problem is with your thermostat, it is an easy and relatively cheap fix.

Checking out these frequent problems may help you diagnose your furnace complications and get away from having to pay for heating repairs Allen TX